has no substantive legal effect. 5. Paragraphs S7.1.2, S7.1.2.13, S7.1.2.13.1, S7.2, S7.2.13, S7.3, S7.3.13, and S7.3.13.1 of FMVSS No. 2021-18355 Filed 8-25-21; 8:45 am], updated on 4:15 PM on Friday, July 29, 2022, updated on 8:45 AM on Friday, July 29, 2022, 97 documents For complete information about, and access to, our official publications headings within the legal text of Federal Register documents.
documents in the last year, 1375 HFT filed a noncompliance report dated October 26, 2020, pursuant to 49 CFR part 573, Defect and Noncompliance Responsibility and Reports. 3. v. Further, HFT claims that the lamps met the photometric requirements for all other testing zones and met all other requirements of FMVSS No. AS9120B, ISO 9001:2015, and FAA 0056B Accredited, 2 in. These results match your search query. Director, Office of Vehicle Safety Compliance. Harbor Freight Tools (HFT) has determined that certain Kenway 12V Magnetic Towing Light Kits and Submersible LED Trailer Lights manufactured by Jinhua Eagle King Tools Co., Ltd. do not fully comply with Federal Motor Vehicle Safety Standard (FMVSS) No.
to the courts under 44 U.S.C.
HFT explains that the noncompliance is that the subject trailer lighting kits are equipped with turn signal, stop lamp, and tail lamps that exceeds the maximum and/or minimum photometric intensity output requirements, as required by FMVSS No. Run one YELLOW wire and one BROWN wire down the left side and one GREEN wire and one BROWN wire down the right side of the trailer. rendition of the daily Federal Register on FederalRegister.gov does not Each document posted on the site includes a link to the It is not an official legal edition of the Federal Table VIII specifies the various Start Printed Page 47730minimum and maximum photometric intensity requirements for tail lamps at specified test points. This notice announces receipt of HFT's petition. Thus, HFT claims the minor discrepancy in one zone is offset by the substantial (and compliant) exceedances in the remaining zones. Note: These Trailer Lights depend on a metal, grounded trailer frame. [6] Only official editions of the Round Amber Marker Trailer Tail Light, 4 in. better and aid in comparing the online edition to the print edition. The President of the United States communicates information on holidays, commemorations, special observances, trade, and policy through Proclamations. The impact-resistant housing protects bulbs. This document has been published in the Federal Register. When the petition is granted or denied, notice of the decision will also be published in the Federal Register pursuant to the authority indicated at the end of this notice. iv. establishing the XML-based Federal Register as an ACFR-sanctioned HFT states that when the photometric intensity level is within 25% above or below the boundary limit, the difference in the light being emitted is typically not perceptible to other drivers. If the towing vehicle has rear turn signals separated from its stop lights, additional hardware and installation procedures will be needed. on NARA's archives.gov.
on KENWAY Submersible LED Trailer Light Kit Owners Manual, Kenway 58468 Magnetic LED Wireless Towing Light Kit Owners Manual, LED Light Remote Control LED Studio Light Kit Instructions, LED s light LED Solar Wall Light Installation Guide, IKEA SOLVINDEN LED String Light with 12 Light Instruction Manual, Mirabella LED spike light kit Instruction Manual, AJAX 8706 KeyPad Wireless Touch Keyboard User Manual, Meizhou Hongfeng Arts Crafts 266285 BJ 57IN Snowman With Snowflakes Instruction Manual, AJAX 7661 StreetSiren Wireless Outdoor Siren User Manual, AJAX 17938 12V PSU for Hub/Hub Plus/ReX Power Supply Unit User Manual, AJAX 10306 Transmitter Wired to Wireless Detector Converter User Manual, ZERFUN G8 Pro Wireless Microphone System User Manual, Airrex Infrared Heater AH-200/300/800 User Manual, 2017 Toyota Camry Hybrid LE Fuse Box Diagrams, 2017 Mitsubishi Lancer 4WD Fuse Box Diagrams, Mitsubishi Lancer Passenger and Engine Fuse Box Diagram, Mira Honesty ERD Bar Valve and Fittings User Manual. 108 requirements to which they were tested. documents in the last year, 496
Again, all of the overall photometric requirements for each of the zones were met. Contact a qualified technician for guidance. Home KENWAY KENWAY Submersible LED Trailer Light Kit Owners Manual. Keep installation area clean and well lit. Connect the BROWN wire of the Trunk Harness (4) to the towing vehicles Running Lights wire. HFT filed a noncompliance report dated October 26, 2020, and subsequently petitioned NHTSA on November 23, 2020, for a decision that the subject noncompliance is inconsequential as it relates to motor vehicle safety. Improper installation can create hazards. This PDF is cid:[emailprotected]. the current document as it appeared on Public Inspection on electronic version on GPOs govinfo.gov. However, HFT claims, the overall photometric requirements for all of the test zones were met. 3. This submersible trailer light provides all-weather protection for launching watercraft or off-road water crossings. In each case, all of the individual test points that make up Zone 3 were at least 60% of the required candela value and in many cases, were more than 90% of the value for the individual test point. We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Approximately 3,832 units, in total, are potentially involved. We hope that you will visit us again the next time you need industrial parts and make us your strategic purchasing partner.
chapter 301 on the basis that this noncompliance is inconsequential as it relates to motor vehicle safety, pursuant to 49 U.S.C. Use the PDF linked in the document sidebar for the official electronic format. Interested persons are invited to submit written data, views, and arguments on this petition. Mount the Tail Light (1b), marked LH (with the License Window on bottom), on the left rear of the trailer with its side marker to the outside of the trailer. vii. The docket ID number for this petition is shown in the heading of this notice. DOT's complete Privacy Act Statement is available for review in a Federal Register notice published on April 11, 2000 (65 FR 19477-78). If you continue to use this site we will assume that you are happy with it. edition of the Federal Register. Note that all comments received will be posted without change to https://www.regulations.gov,, including any personal information provided. [FR Doc. We use cookies to ensure that we give you the best experience on our website. At Parts Circuit, one of our competitive advantages is our ongoing relationships with many top suppliers and manufacturers. Then, mount the License Plate Bracket (2) underneath it. Of that universe, there were just two samples of submersible trailer light kits that had slightly reduced photometric values and three samples of the magnetic trailer light kit that experienced minimal exceedances. publication in the future. The brighter Stop Lights should turn on only when the vehicles brake pedal is depressed, or when the vehicles turn signal is activated (ignition key must be in its on position). If any parts are missing or broken, please call 1-888-866-5797 as soon as possible. Each stop lamp must be designed to conform to the photometry requirements of Table IX, when tested according to the procedure of paragraph S14.2.1, for the number of lamp compartments or individual lamps and the type of vehicle it is installed on. Four-Way Trailer Wiring Connection Kit, 5 Ft.
Mount the Tail Light (1a), marked RH (without the License Window), on the right rear of the trailer with its side marker to the outside of the trailer. Send comments on or before September 27, 2021.
submersible Keep bystanders out of the area during installation. Install only according to these instructions. 108, Lamps, Reflective Devices, and Associated Equipment. This notice of receipt of HFT's petition is published under 49 U.S.C. [2] HFT's petition and the attachments can be found in full at https://www.regulations.gov by following the online instructions for accessing the docket. Open for Comment, Proposed Addition of American Single Malt Whisky to the Standards of Identity for Distilled Spirits, Economic Sanctions & Foreign Assets Control, Vessel Repair Duties for Vessels Entering U.S.
NHTSA has also applied this reasoning to noncompliances with particular zones, not just individual test points. 30118, 30120: Delegations of authority at 49 CFR 1.95 and 501.8. documents in the last year, 910 The Public Inspection page may also Specify UPC 193175454386 when ordering parts.
Therefore, any decision on this petition only applies to the subject equipment that HFT no longer controlled at the time it determined that the noncompliance existed. This objective metric has been applied to various types of lighting sources, including turn signal lighting. To begin the purchasing process instantly, submit an RFQ today. Two individual test samples fell below the required candela values for turn signals and stop lamps only in Zone 3. iii. Connect the GREEN wire of the Trunk Harness to the vehicles Right Stop & Turn light. Jinhua Eagle King Tools Co., Ltd manufactured the Kenway 12V Magnetic LED Towing Light Kits between November 13, 2019 and December 22, 2019 and the Kenway 12V Submersible Trailer Lights between July 1, 2019 and July 9, 2019. All comments and supporting materials received before the close of business on the closing date indicated above will be filed in the docket and will be considered. 07/29/2022, 170 by the Alcohol and Tobacco Tax and Trade Bureau Until the ACFR grants it official status, the XML Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product.
It was viewed 3 times while on Public Inspection. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. LED Light Remote Control LED Studio Light Kit Instructions VL-35K 35 Watt LED Studio Light Kit Remote Control, LED s light LED Solar Wall Light Installation Guide Product Overview Installation Warning Safety warning! The OFR/GPO partnership is committed to presenting accurate and reliable Ports, Packaging and Transportation of Radioactive Material, Rate Adjustments for Indian Irrigation Projects, Bolstering Efforts To Bring Hostages and Wrongfully Detained United States Nationals Home, Establishing an Emergency Board To Investigate Disputes Between Certain Railroads Represented by the National Carriers' Conference Committee of the National Railway Labor Conference and Their Employees Represented by Certain Labor Organizations, National Highway Traffic Safety Administration, Harbor Freight Tools Inconsequential Noncompliance Petition. documents in the last year, 19 To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. HFT's complete petition and all supporting documents are available by logging onto the FDMS website at https://www.regulations.gov and by following the online search instructions to locate the docket number as listed in the title of this notice.
Do not install when tired or when under the influence of drugs or medication. documents in the last year, 81 In that case, one exemplar unit had a single test point (0.5D/1.3L) that measured 440 cd after one minute, an exceedance of 4.6% and above the 420 cd maximum value for any test point. are not part of the published document itself. daily Federal Register on FederalRegister.gov will remain an unofficial NHTSA notes that the statutory provisions (49 U.S.C. Counts are subject to sampling, reprocessing and revision (up or down) throughout the day. documents in the last year, 108 Do not install this product yourself unless you are technically competent to do so.
This table of contents is a navigational tool, processed from the
HFT states that the lamps met the photometric requirements at all other test points and met all other requirements of FMVSS No. Submersible LED Stop/Turn Trailer Tail Light, 25 Ft. Authority: 49 U.S.C. Summary of HFT's Petition, are the views and arguments provided by HFT. Use the included Metal Frame Clips to mount each half of the Y-Harness (3) down each side of the trailer. provides a visual depiction of the relationship between the two outlier values to the 520 cd minimum for the Zone 3 test results for the submersible trailer light kits tested by Calcoast. If necessary, have a qualified technician install the Trailer Lights. The two Tail Lights (1a and 1b) should turn on.3. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Because all of the test points within the zone are compliant, this accounts for the minimal effects on the photometric output of the zone overall. HFT says that historically, NHTSA has granted inconsequentiality petitions when the noncompliance is imperceptible or nearly imperceptible to vehicle occupants or surrounding traffic. NOTE: INSTALL THE TRAILER LIGHTS ONLY AFTER THE TRAILER IS FULLY ASSEMBLED. See General Motors Corporation; Grant of Application for Decision of Inconsequential Noncompliance; 61 FR 1663, January 22, 1996; see also BMW of North America, LLC, Grant of Petition for Decision of Inconsequential Noncompliance; 82 FR 55484, November 21, 2017. A Notice by the National Highway Traffic Safety Administration on 08/26/2021. HFT claims that is the case here. In one sample, a single test point slightly exceeded the tail lamp maximum output of 25 candelas, where one sample measured 25.7 cd at the H-V point and in another sample a single test point (at 1.0U/0.9R) measured 31.87 cd. Park on level area away from traffic and set vehicle parking brake/chock tires. The lack of reports or indications that the subject trailer lights are either too bright or too dim supports the conclusion that the condition is undetectable to road users such as drivers following a vehicle equipped with either of the lighting products. 30118, and a remedy for the noncompliance, as required by 49 U.S.C. Finally, HFT has reviewed its systems and has not received any reports or complaints about the levels of brightness for these trailer lighting kits. on documents in the last year, 33 See General Motors Corporation; Grant of Application for Decision of Inconsequential Noncompliance; 61 FR 1663, January 22, 1996. All shipments must comply with U.S.A export laws.
While every effort has been made to ensure that 108. documents in the last year, 1443 documents in the last year. from a range of 27%-44% higher than the minimum candela value for the zone for one sample and 26%-37% higher than the minimum candela value for each zone for the other sample). For the magnetic trailer light kit produced in calendar week 46, two samples measured slightly higher candela values for a single test point when evaluated under the photometric intensity values for turn signals and stop lamps. Owned and operated by ASAP Semiconductor, Parts Circuit has access to an inventory of more than two billion new and obsolete parts and components.
More information and documentation can be found in our include documents scheduled for later issues, at the request Leroy Angeles, General Engineer, NHTSA, Office of Vehicle Safety Compliance, (202) 366-5304. The timer switches the light off automatically, Mirabella LED spike light kit Instruction Manual Specification: Round 32mm 4 pack LED spike light kit 4 x. This is a range of 2.7%-21.5% above the maximum candela value. Strangulation hazard. Federal Register provide legal notice to the public and judicial notice Separately, a batch of magnetic trailer light kits produced in week 52 was evaluated. This gives us the ability to leverage our purchasing power to secure short lead times and competitive prices, even on AOG orders. i. HFT's submersible trailer light kit consists of a pair of replacement trailer lamps to be used on trailers less than 80 inches in overall width. In this case, a total of six tests were conducted on samples from the same production batch produced in calendar week 27. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
The LED lamps used in the kit, function as a combination lamp with three lighted sections. 18 LEDs for Right Hand Light (not serviceable). The documents posted on this site are XML renditions of published Federal Hang out of reach of young children. 2 Combination Submersible, Stop, Tail, Turn Signals, License Plate Bracket, 4 ft. Trunk Harness and 22 ft. Y-Harness. NHTSA has stated that it will not consider a lamp to be noncompliant if its failure to meet a test point is random and occasional. The President of the United States manages the operations of the Executive branch of Government through Executive orders. Each lamp is a combination lamp that functions as a turn signal, stop lamp and tail lamp with three lighted sections. Use the correct lights and electrical setup for your trailer.
documents in the last year, by the Nuclear Regulatory Commission the official SGML-based PDF version on govinfo.gov, those relying on it for Your email address will not be published.
2. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. HFT subsequently petitioned NHTSA on November 23, 2020, for an exemption from the notification and remedy requirements of 49 U.S.C. 108. Ensure you have, SOLVINDEN CAUTION! Microsoft is not compensated for these results. The documents may also be viewed on the internet at https://www.regulations.gov by following the online instructions for accessing the docket. on Compensation from these sellers is one of several factors that influences ranking of these results. If you wish to receive confirmation that comments you have submitted by mail were received, please enclose a stamped, self-addressed postcard with the comments. from 37 agencies. Whether you need items from Kenway or any other manufacturer, we can help. Please take a moment to let us know how we are doing by answering just a few questions so we can improve our service and your experience. This feature is not available for this document. Thus, HFT claims, the actual performance of HFT's lamps compared to compliant lamps would not be perceptible to the human eye and therefore would not create an enhanced risk to safety. 108, Lamps, Reflective Devices, and Associated Equipment (49 CFR 571.108). All of the overall photometric requirements for each of the zones were met. documents in the last year, by the Indian Affairs Bureau documents in the last year, 50 Table VII specifies the various minimum and maximum photometric intensity requirements for rear turn signal lamps at specified test points. HFT explains that it engaged Calcoast to conduct comprehensive compliance monitoring of its trailer light products. 108 to which they were tested. documents in the last year, 886 For this product, the noncompliance occurred at certain individual test points, not at the zone level. Register, and does not replace the official print version or the official Comments must refer to the docket and notice number cited in the title of this notice and submitted by any of the following methods: Comments must be written in the English language and be no greater than 15 pages in length, although there is no limit to the length of necessary attachments to the comments. Comment document.getElementById("comment").setAttribute("id","a6d434613d352cad59fa89afd6a53f49");document.getElementById("afe6277d1c").setAttribute("id","comment"); Save my name, email, and website in this browser for the next time I comment. on FederalRegister.gov documents in the last year, by the Maritime Administration offers a preview of documents scheduled to appear in the next day's This repetition of headings to form internal navigation links 4. Furthermore, our vast and diverse international supply chain network allows us to source parts from manufacturers from all over the world and ship them directly to you. Note: If product has no serial number, record month and year of purchase instead. The Public Inspection page The second product at issue is a 12V magnetic LED trailer light kit each trailer light kit consists of a pair of lamps that are intended to be magnetically attached to the rear of a trailer and that are wired to the towing vehicle's tail lamps. Do not use while trailer light operation does not match vehicle light operation, if any lights do not light up, or if any lights flicker. For these two test samples, one sample measured 466.33 cd in Zone 3 and the other sample measured 497.39 cd in Zone 3a deviation of 4.5% and 10.4%, respectively. on iii. 07/29/2022, 209 After mounting, use wire nut connectors (not included) to connect all three leads together. submersible THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. When unpacking, make sure that the product is intact and undamaged. 07/29/2022, 47
Attach the WHITE GROUND wire to the trailer tongue or frame. 07/29/2022, 247 Federal Register issue. corresponding official PDF file on govinfo.gov. on They have not been evaluated by the Agency and do not reflect the views of the Agency. 108 to which they were tested. 30118 and 30120 and does not represent any Agency decision or other exercise of judgment concerning the merits of the petition. Kenway Submersible LED Trailer Light - Left Side, PEAKTOW PTL0434 Trailer Truck Steel Light Boxes With , PEAKTOW PTL0253 Round LED 2 Inches 12V Submersibl, 15" 9 LED 3 Red Trailer Light Bar [DOT FMVSS 108] [SAE P, Partsam 12V LED Trailer Light Kit, Halo Glow Submersible S, MAXXHAUL 50343 12V LED Submersible Left And Right T, PEAKTOW PTL0401 Round Red 4 Inches LED Submersibl, CZC AUTO LED Amber Side Marker Lights Sealed Submer, PEAKTOW PTL0283 Round LED 2.5" Submersible Cleara, Partsam 2Pcs 15" Inch White Led Trailer Reverse Backup L, Nilight 2PCS 16Inch 11 LED Red Trailer Light Bar For Par, Partsam 10Pcs 3.9" Thin Line Trailer Led Side Marker And , 2Pair Left+Right Led Submersible Red Trailer Rect, Pair Left+Right Led Submersible Red Trailer Rect, MICTUNING 2PCS 16 Inches 11 LED Red Trailer Light Bar - W, Blyilyb 6" Oval White Color LED Trailer Truck Clear Rever, Bargman 30-59-001 Clearance/Side Marker Light. i. Thus, historically, there has never been an absolute requirement that every motor vehicle lighting device meet every single photometric test point to comply with FMVSS No. All comments and supporting materials received after the closing date will also be filed and will be considered to the fullest extent possible. HFT claims that this indicates that the LED lamps were in fact designed to comply with FMVSS No. documents in the last year, 674
Products are ranked based on relevance to your search. Then connect to the Brown wire in the back of one Tail Light (either side) provided in this Kit.
HFT describes the subject noncompliance and contends that the noncompliance is inconsequential as it relates to motor vehicle safety. The President of the United States issues other types of documents, including but not limited to; memoranda, notices, determinations, letters, messages, and orders. Relevant information about this document from Regulations.gov provides additional context. In other words, the zone itself was only 10.4% and 4.4% lower than the minimum required candela value.
Let us show you what makes us the evolution of purchasing. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. Learn more here.
ii. Further, HFT states, for the magnetic trailer light kits there is no increased risk of glare to oncoming motorists because the photometric exceedances are minimal and in all cases, below the threshold metric of 25% so that the differences are not perceptible to other drivers.[1]. 07/29/2022, 832 informational resource until the Administrative Committee of the Federal These can be useful should verify the contents of the documents against a final, official Failure to do so can result in serious injury.SAVE THIS MANUAL.
All comments, background documentation, and supporting materials submitted to the docket may be viewed by anyone at the address and times given above. Four-Way Trailer Wiring Connection Kit, 6 in. Separately, HFT also states that NHTSA has recognized the inherent challenges to manufacture all lamps so that each and every test point within the lamp meets the minimum criteria. Submersible LED Stop/Turn Trailer Tail Light, Submersible LED Trailer Light - Right Side, Submersible LED Trailer Light - Left Side, Seven-Way RV Blade to Four-Wire Flat Adapter with Flex Cord, Seven-Way Blade to 4-Way Flat Trailer Adapter, 2 in.
documents in the last year, 1375 HFT filed a noncompliance report dated October 26, 2020, pursuant to 49 CFR part 573, Defect and Noncompliance Responsibility and Reports. 3. v. Further, HFT claims that the lamps met the photometric requirements for all other testing zones and met all other requirements of FMVSS No. AS9120B, ISO 9001:2015, and FAA 0056B Accredited, 2 in. These results match your search query. Director, Office of Vehicle Safety Compliance. Harbor Freight Tools (HFT) has determined that certain Kenway 12V Magnetic Towing Light Kits and Submersible LED Trailer Lights manufactured by Jinhua Eagle King Tools Co., Ltd. do not fully comply with Federal Motor Vehicle Safety Standard (FMVSS) No.
to the courts under 44 U.S.C.
HFT explains that the noncompliance is that the subject trailer lighting kits are equipped with turn signal, stop lamp, and tail lamps that exceeds the maximum and/or minimum photometric intensity output requirements, as required by FMVSS No. Run one YELLOW wire and one BROWN wire down the left side and one GREEN wire and one BROWN wire down the right side of the trailer. rendition of the daily Federal Register on FederalRegister.gov does not Each document posted on the site includes a link to the It is not an official legal edition of the Federal Table VIII specifies the various Start Printed Page 47730minimum and maximum photometric intensity requirements for tail lamps at specified test points. This notice announces receipt of HFT's petition. Thus, HFT claims the minor discrepancy in one zone is offset by the substantial (and compliant) exceedances in the remaining zones. Note: These Trailer Lights depend on a metal, grounded trailer frame. [6] Only official editions of the Round Amber Marker Trailer Tail Light, 4 in. better and aid in comparing the online edition to the print edition. The President of the United States communicates information on holidays, commemorations, special observances, trade, and policy through Proclamations. The impact-resistant housing protects bulbs. This document has been published in the Federal Register. When the petition is granted or denied, notice of the decision will also be published in the Federal Register pursuant to the authority indicated at the end of this notice. iv. establishing the XML-based Federal Register as an ACFR-sanctioned HFT states that when the photometric intensity level is within 25% above or below the boundary limit, the difference in the light being emitted is typically not perceptible to other drivers. If the towing vehicle has rear turn signals separated from its stop lights, additional hardware and installation procedures will be needed. on NARA's archives.gov.
on KENWAY Submersible LED Trailer Light Kit Owners Manual, Kenway 58468 Magnetic LED Wireless Towing Light Kit Owners Manual, LED Light Remote Control LED Studio Light Kit Instructions, LED s light LED Solar Wall Light Installation Guide, IKEA SOLVINDEN LED String Light with 12 Light Instruction Manual, Mirabella LED spike light kit Instruction Manual, AJAX 8706 KeyPad Wireless Touch Keyboard User Manual, Meizhou Hongfeng Arts Crafts 266285 BJ 57IN Snowman With Snowflakes Instruction Manual, AJAX 7661 StreetSiren Wireless Outdoor Siren User Manual, AJAX 17938 12V PSU for Hub/Hub Plus/ReX Power Supply Unit User Manual, AJAX 10306 Transmitter Wired to Wireless Detector Converter User Manual, ZERFUN G8 Pro Wireless Microphone System User Manual, Airrex Infrared Heater AH-200/300/800 User Manual, 2017 Toyota Camry Hybrid LE Fuse Box Diagrams, 2017 Mitsubishi Lancer 4WD Fuse Box Diagrams, Mitsubishi Lancer Passenger and Engine Fuse Box Diagram, Mira Honesty ERD Bar Valve and Fittings User Manual. 108 requirements to which they were tested. documents in the last year, 496
Again, all of the overall photometric requirements for each of the zones were met. Contact a qualified technician for guidance. Home KENWAY KENWAY Submersible LED Trailer Light Kit Owners Manual. Keep installation area clean and well lit. Connect the BROWN wire of the Trunk Harness (4) to the towing vehicles Running Lights wire. HFT filed a noncompliance report dated October 26, 2020, and subsequently petitioned NHTSA on November 23, 2020, for a decision that the subject noncompliance is inconsequential as it relates to motor vehicle safety. Improper installation can create hazards. This PDF is cid:[emailprotected]. the current document as it appeared on Public Inspection on electronic version on GPOs govinfo.gov. However, HFT claims, the overall photometric requirements for all of the test zones were met. 3. This submersible trailer light provides all-weather protection for launching watercraft or off-road water crossings. In each case, all of the individual test points that make up Zone 3 were at least 60% of the required candela value and in many cases, were more than 90% of the value for the individual test point. We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Approximately 3,832 units, in total, are potentially involved. We hope that you will visit us again the next time you need industrial parts and make us your strategic purchasing partner.
chapter 301 on the basis that this noncompliance is inconsequential as it relates to motor vehicle safety, pursuant to 49 U.S.C. Use the PDF linked in the document sidebar for the official electronic format. Interested persons are invited to submit written data, views, and arguments on this petition. Mount the Tail Light (1b), marked LH (with the License Window on bottom), on the left rear of the trailer with its side marker to the outside of the trailer. vii. The docket ID number for this petition is shown in the heading of this notice. DOT's complete Privacy Act Statement is available for review in a Federal Register notice published on April 11, 2000 (65 FR 19477-78). If you continue to use this site we will assume that you are happy with it. edition of the Federal Register. Note that all comments received will be posted without change to https://www.regulations.gov,, including any personal information provided. [FR Doc. We use cookies to ensure that we give you the best experience on our website. At Parts Circuit, one of our competitive advantages is our ongoing relationships with many top suppliers and manufacturers. Then, mount the License Plate Bracket (2) underneath it. Of that universe, there were just two samples of submersible trailer light kits that had slightly reduced photometric values and three samples of the magnetic trailer light kit that experienced minimal exceedances. publication in the future. The brighter Stop Lights should turn on only when the vehicles brake pedal is depressed, or when the vehicles turn signal is activated (ignition key must be in its on position). If any parts are missing or broken, please call 1-888-866-5797 as soon as possible. Each stop lamp must be designed to conform to the photometry requirements of Table IX, when tested according to the procedure of paragraph S14.2.1, for the number of lamp compartments or individual lamps and the type of vehicle it is installed on. Four-Way Trailer Wiring Connection Kit, 5 Ft.
Mount the Tail Light (1a), marked RH (without the License Window), on the right rear of the trailer with its side marker to the outside of the trailer. Send comments on or before September 27, 2021.
submersible Keep bystanders out of the area during installation. Install only according to these instructions. 108, Lamps, Reflective Devices, and Associated Equipment. This notice of receipt of HFT's petition is published under 49 U.S.C. [2] HFT's petition and the attachments can be found in full at https://www.regulations.gov by following the online instructions for accessing the docket. Open for Comment, Proposed Addition of American Single Malt Whisky to the Standards of Identity for Distilled Spirits, Economic Sanctions & Foreign Assets Control, Vessel Repair Duties for Vessels Entering U.S.
NHTSA has also applied this reasoning to noncompliances with particular zones, not just individual test points. 30118, 30120: Delegations of authority at 49 CFR 1.95 and 501.8. documents in the last year, 910 The Public Inspection page may also Specify UPC 193175454386 when ordering parts.
Therefore, any decision on this petition only applies to the subject equipment that HFT no longer controlled at the time it determined that the noncompliance existed. This objective metric has been applied to various types of lighting sources, including turn signal lighting. To begin the purchasing process instantly, submit an RFQ today. Two individual test samples fell below the required candela values for turn signals and stop lamps only in Zone 3. iii. Connect the GREEN wire of the Trunk Harness to the vehicles Right Stop & Turn light. Jinhua Eagle King Tools Co., Ltd manufactured the Kenway 12V Magnetic LED Towing Light Kits between November 13, 2019 and December 22, 2019 and the Kenway 12V Submersible Trailer Lights between July 1, 2019 and July 9, 2019. All comments and supporting materials received before the close of business on the closing date indicated above will be filed in the docket and will be considered. 07/29/2022, 170 by the Alcohol and Tobacco Tax and Trade Bureau Until the ACFR grants it official status, the XML Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. LED Light Remote Control LED Studio Light Kit Instructions VL-35K 35 Watt LED Studio Light Kit Remote Control, LED s light LED Solar Wall Light Installation Guide Product Overview Installation Warning Safety warning! The OFR/GPO partnership is committed to presenting accurate and reliable Ports, Packaging and Transportation of Radioactive Material, Rate Adjustments for Indian Irrigation Projects, Bolstering Efforts To Bring Hostages and Wrongfully Detained United States Nationals Home, Establishing an Emergency Board To Investigate Disputes Between Certain Railroads Represented by the National Carriers' Conference Committee of the National Railway Labor Conference and Their Employees Represented by Certain Labor Organizations, National Highway Traffic Safety Administration, Harbor Freight Tools Inconsequential Noncompliance Petition. documents in the last year, 19 To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. HFT's complete petition and all supporting documents are available by logging onto the FDMS website at https://www.regulations.gov and by following the online search instructions to locate the docket number as listed in the title of this notice.
Do not install when tired or when under the influence of drugs or medication. documents in the last year, 81 In that case, one exemplar unit had a single test point (0.5D/1.3L) that measured 440 cd after one minute, an exceedance of 4.6% and above the 420 cd maximum value for any test point. are not part of the published document itself. daily Federal Register on FederalRegister.gov will remain an unofficial NHTSA notes that the statutory provisions (49 U.S.C. Counts are subject to sampling, reprocessing and revision (up or down) throughout the day. documents in the last year, 108 Do not install this product yourself unless you are technically competent to do so.
This table of contents is a navigational tool, processed from the
HFT states that the lamps met the photometric requirements at all other test points and met all other requirements of FMVSS No. Submersible LED Stop/Turn Trailer Tail Light, 25 Ft. Authority: 49 U.S.C. Summary of HFT's Petition, are the views and arguments provided by HFT. Use the included Metal Frame Clips to mount each half of the Y-Harness (3) down each side of the trailer. provides a visual depiction of the relationship between the two outlier values to the 520 cd minimum for the Zone 3 test results for the submersible trailer light kits tested by Calcoast. If necessary, have a qualified technician install the Trailer Lights. The two Tail Lights (1a and 1b) should turn on.3. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Because all of the test points within the zone are compliant, this accounts for the minimal effects on the photometric output of the zone overall. HFT says that historically, NHTSA has granted inconsequentiality petitions when the noncompliance is imperceptible or nearly imperceptible to vehicle occupants or surrounding traffic. NOTE: INSTALL THE TRAILER LIGHTS ONLY AFTER THE TRAILER IS FULLY ASSEMBLED. See General Motors Corporation; Grant of Application for Decision of Inconsequential Noncompliance; 61 FR 1663, January 22, 1996; see also BMW of North America, LLC, Grant of Petition for Decision of Inconsequential Noncompliance; 82 FR 55484, November 21, 2017. A Notice by the National Highway Traffic Safety Administration on 08/26/2021. HFT claims that is the case here. In one sample, a single test point slightly exceeded the tail lamp maximum output of 25 candelas, where one sample measured 25.7 cd at the H-V point and in another sample a single test point (at 1.0U/0.9R) measured 31.87 cd. Park on level area away from traffic and set vehicle parking brake/chock tires. The lack of reports or indications that the subject trailer lights are either too bright or too dim supports the conclusion that the condition is undetectable to road users such as drivers following a vehicle equipped with either of the lighting products. 30118, and a remedy for the noncompliance, as required by 49 U.S.C. Finally, HFT has reviewed its systems and has not received any reports or complaints about the levels of brightness for these trailer lighting kits. on documents in the last year, 33 See General Motors Corporation; Grant of Application for Decision of Inconsequential Noncompliance; 61 FR 1663, January 22, 1996. All shipments must comply with U.S.A export laws.
While every effort has been made to ensure that 108. documents in the last year, 1443 documents in the last year. from a range of 27%-44% higher than the minimum candela value for the zone for one sample and 26%-37% higher than the minimum candela value for each zone for the other sample). For the magnetic trailer light kit produced in calendar week 46, two samples measured slightly higher candela values for a single test point when evaluated under the photometric intensity values for turn signals and stop lamps. Owned and operated by ASAP Semiconductor, Parts Circuit has access to an inventory of more than two billion new and obsolete parts and components.
More information and documentation can be found in our include documents scheduled for later issues, at the request Leroy Angeles, General Engineer, NHTSA, Office of Vehicle Safety Compliance, (202) 366-5304. The timer switches the light off automatically, Mirabella LED spike light kit Instruction Manual Specification: Round 32mm 4 pack LED spike light kit 4 x. This is a range of 2.7%-21.5% above the maximum candela value. Strangulation hazard. Federal Register provide legal notice to the public and judicial notice Separately, a batch of magnetic trailer light kits produced in week 52 was evaluated. This gives us the ability to leverage our purchasing power to secure short lead times and competitive prices, even on AOG orders. i. HFT's submersible trailer light kit consists of a pair of replacement trailer lamps to be used on trailers less than 80 inches in overall width. In this case, a total of six tests were conducted on samples from the same production batch produced in calendar week 27. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. The LED lamps used in the kit, function as a combination lamp with three lighted sections. 18 LEDs for Right Hand Light (not serviceable). The documents posted on this site are XML renditions of published Federal Hang out of reach of young children. 2 Combination Submersible, Stop, Tail, Turn Signals, License Plate Bracket, 4 ft. Trunk Harness and 22 ft. Y-Harness. NHTSA has stated that it will not consider a lamp to be noncompliant if its failure to meet a test point is random and occasional. The President of the United States manages the operations of the Executive branch of Government through Executive orders. Each lamp is a combination lamp that functions as a turn signal, stop lamp and tail lamp with three lighted sections. Use the correct lights and electrical setup for your trailer.
documents in the last year, by the Nuclear Regulatory Commission the official SGML-based PDF version on govinfo.gov, those relying on it for Your email address will not be published.
2. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. HFT subsequently petitioned NHTSA on November 23, 2020, for an exemption from the notification and remedy requirements of 49 U.S.C. 108. Ensure you have, SOLVINDEN CAUTION! Microsoft is not compensated for these results. The documents may also be viewed on the internet at https://www.regulations.gov by following the online instructions for accessing the docket. on Compensation from these sellers is one of several factors that influences ranking of these results. If you wish to receive confirmation that comments you have submitted by mail were received, please enclose a stamped, self-addressed postcard with the comments. from 37 agencies. Whether you need items from Kenway or any other manufacturer, we can help. Please take a moment to let us know how we are doing by answering just a few questions so we can improve our service and your experience. This feature is not available for this document. Thus, HFT claims, the actual performance of HFT's lamps compared to compliant lamps would not be perceptible to the human eye and therefore would not create an enhanced risk to safety. 108, Lamps, Reflective Devices, and Associated Equipment (49 CFR 571.108). All of the overall photometric requirements for each of the zones were met. documents in the last year, by the Indian Affairs Bureau documents in the last year, 50 Table VII specifies the various minimum and maximum photometric intensity requirements for rear turn signal lamps at specified test points. HFT explains that it engaged Calcoast to conduct comprehensive compliance monitoring of its trailer light products. 108 to which they were tested. documents in the last year, 886 For this product, the noncompliance occurred at certain individual test points, not at the zone level. Register, and does not replace the official print version or the official Comments must refer to the docket and notice number cited in the title of this notice and submitted by any of the following methods: Comments must be written in the English language and be no greater than 15 pages in length, although there is no limit to the length of necessary attachments to the comments. Comment document.getElementById("comment").setAttribute("id","a6d434613d352cad59fa89afd6a53f49");document.getElementById("afe6277d1c").setAttribute("id","comment"); Save my name, email, and website in this browser for the next time I comment. on FederalRegister.gov documents in the last year, by the Maritime Administration offers a preview of documents scheduled to appear in the next day's This repetition of headings to form internal navigation links 4. Furthermore, our vast and diverse international supply chain network allows us to source parts from manufacturers from all over the world and ship them directly to you. Note: If product has no serial number, record month and year of purchase instead. The Public Inspection page The second product at issue is a 12V magnetic LED trailer light kit each trailer light kit consists of a pair of lamps that are intended to be magnetically attached to the rear of a trailer and that are wired to the towing vehicle's tail lamps. Do not use while trailer light operation does not match vehicle light operation, if any lights do not light up, or if any lights flicker. For these two test samples, one sample measured 466.33 cd in Zone 3 and the other sample measured 497.39 cd in Zone 3a deviation of 4.5% and 10.4%, respectively. on iii. 07/29/2022, 209 After mounting, use wire nut connectors (not included) to connect all three leads together. submersible THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. When unpacking, make sure that the product is intact and undamaged. 07/29/2022, 47
Attach the WHITE GROUND wire to the trailer tongue or frame. 07/29/2022, 247 Federal Register issue. corresponding official PDF file on govinfo.gov. on They have not been evaluated by the Agency and do not reflect the views of the Agency. 108 to which they were tested. 30118 and 30120 and does not represent any Agency decision or other exercise of judgment concerning the merits of the petition. Kenway Submersible LED Trailer Light - Left Side, PEAKTOW PTL0434 Trailer Truck Steel Light Boxes With , PEAKTOW PTL0253 Round LED 2 Inches 12V Submersibl, 15" 9 LED 3 Red Trailer Light Bar [DOT FMVSS 108] [SAE P, Partsam 12V LED Trailer Light Kit, Halo Glow Submersible S, MAXXHAUL 50343 12V LED Submersible Left And Right T, PEAKTOW PTL0401 Round Red 4 Inches LED Submersibl, CZC AUTO LED Amber Side Marker Lights Sealed Submer, PEAKTOW PTL0283 Round LED 2.5" Submersible Cleara, Partsam 2Pcs 15" Inch White Led Trailer Reverse Backup L, Nilight 2PCS 16Inch 11 LED Red Trailer Light Bar For Par, Partsam 10Pcs 3.9" Thin Line Trailer Led Side Marker And , 2Pair Left+Right Led Submersible Red Trailer Rect, Pair Left+Right Led Submersible Red Trailer Rect, MICTUNING 2PCS 16 Inches 11 LED Red Trailer Light Bar - W, Blyilyb 6" Oval White Color LED Trailer Truck Clear Rever, Bargman 30-59-001 Clearance/Side Marker Light. i. Thus, historically, there has never been an absolute requirement that every motor vehicle lighting device meet every single photometric test point to comply with FMVSS No. All comments and supporting materials received after the closing date will also be filed and will be considered to the fullest extent possible. HFT claims that this indicates that the LED lamps were in fact designed to comply with FMVSS No. documents in the last year, 674
Products are ranked based on relevance to your search. Then connect to the Brown wire in the back of one Tail Light (either side) provided in this Kit.
HFT describes the subject noncompliance and contends that the noncompliance is inconsequential as it relates to motor vehicle safety. The President of the United States issues other types of documents, including but not limited to; memoranda, notices, determinations, letters, messages, and orders. Relevant information about this document from Regulations.gov provides additional context. In other words, the zone itself was only 10.4% and 4.4% lower than the minimum required candela value.
Let us show you what makes us the evolution of purchasing. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. Learn more here.
ii. Further, HFT states, for the magnetic trailer light kits there is no increased risk of glare to oncoming motorists because the photometric exceedances are minimal and in all cases, below the threshold metric of 25% so that the differences are not perceptible to other drivers.[1]. 07/29/2022, 832 informational resource until the Administrative Committee of the Federal These can be useful should verify the contents of the documents against a final, official Failure to do so can result in serious injury.SAVE THIS MANUAL. All comments, background documentation, and supporting materials submitted to the docket may be viewed by anyone at the address and times given above. Four-Way Trailer Wiring Connection Kit, 6 in. Separately, HFT also states that NHTSA has recognized the inherent challenges to manufacture all lamps so that each and every test point within the lamp meets the minimum criteria. Submersible LED Stop/Turn Trailer Tail Light, Submersible LED Trailer Light - Right Side, Submersible LED Trailer Light - Left Side, Seven-Way RV Blade to Four-Wire Flat Adapter with Flex Cord, Seven-Way Blade to 4-Way Flat Trailer Adapter, 2 in.