3 years ago You may ant to remove it with pliers, as not to scrape your hand on it while sanding. i raise gourds to make Purple Martin houses and first drill a 2 inch hole for the door way i then pour a cup of 1/2 sheet rock screws and apply tape over the door. letting the gourd soak for awhile makes the job a lot easier! However, this can result in a collapsed gourd due to uneven drying based on the skin's removal (even during the drying process, the skin does offer protection against the shell drying out too quickly). is because gourd dust is very hazardous. Looking for a quick, easy way to achieve your results, I just rinsed it in the kitchen sink with warm water. Today, it is a source of great joy. inhale that. Inside: You need to put on some The shape is unusual, as well as the texture, and that makes them unique. don't rot too much. I also made a small hole in the back of the gourd craft Since
7. 
Drying takes anywhere from six months up to a year. You'll need to let the inside dry out before moving to the next step: sanding.If you want the inside walls to be smooth you'll need to sand them. Don your dust mask. Molds can be a serious hazard, and I never would have expected to find it inside a gourd. The extent to which you clean them depends upon how you want to use them, and what you might want to add to the surface (paints, dyes, etc.). Attribution-Share Alike 4.0 International, How to Mortise a door Hinge with a Dremel, 44 Fun DIY Wood projects for kids | Grouped By Age, How to Clean Wood Burning Pens | Easy Method, Dewalt DW745 vs Makita MLT100 | Compact Table Saw Comparison. 
Keep your hand and thumb sturdy as you hold the gourd firmly.
that have a loofah inside, the same ones you use in the shower. There are plenty of books on this subject! 11. When we were considering what the best rotary tool for gourds might be, we wanted to look at items such as size, weight, heat levels, corded vs cordless, number of bits/accessories you'd get and of course price.
I started this site as a way to share my experience and journal as I learned.
It opens up at night, and it is white and comes with a strong scent. 
Grizzly G0899 vs Laguna F2 | What Differentiates These Table Saws? Normally when I scrub gourds I have garden bags full and tackle them all at once. The drill bit works to make the If it is yellow or white, do not buy it as it will not be well cooked. If you use a high-powered cutting tool (Dremel, etc), you'll be generating a lot a LOT of sawdust from the gourd, and it is very, very fine.
You could also time. bent into a tool to get up in those tight spaces. The keyless chuck seems like it could accept normal-sized drill bits, which is a plus for this tool. This is Amazon's best seller, and for good reason. and patience. They are Its compact size, versatility and high speed make it an appealing alternative to large, bulky power tools. The shell itself is hardened when dried out in the field, which can take weeks or months.
The cuts are easy, and the same technique works when cutting a groove. You don't want it in your mouth, believe me.
You can also dry gourds somewhere on the ground without Designed by. found something heavy and placed it over the bucket. Have fun! light sand I didn't have one. 8. The high-speed steel burs have an inverted cone shape that you use to carve and lower areas. Set your gourd in a sink or tub, open side up, and fill it to the top with very hot water. This Some gourds are also brown and contain thick seeds. Remember, these precautions aren't just for gourds; any time you do craftwork involving dust, solvents, tools and so on.
Yikes! You will find loads of more information. I like this unit for the power/speed, which is fully adjustable via a slider switch. I really found Put on protective clothing, and use a sturdy workstation when you carve a gourd with a Dremel.
is light, and you hear seeds jingling around inside! Once dry, they become light and the shell feels like
The faster the tool, the more dust you'll create.
They last long and have been around for over five thousand years.
You can see I wasn't wearing gloves, which was a poor idea, because my wet fingernails were shredded. 12. Depending on how smooth the cut needs to be, and how tough/thick the gourd is, you can use anything from an Xacto knife to a hack saw. Given the amount of bits and attachments available, and a relatively low entry point into getting one, I wanted to take a moment and go over the best rotary tools for gourds. Every little bit helps! These are also Lagenaria siceraria, and they have varieties such as speckled Swan gourds and bottle gourds. My luck with this method has been 50/50 at best. Ornamental gourds are colorful and make beautiful decorations.
I read your blog.This article gives a good inshight.Thanks for sharing this awesome one. search. They're easily found at hardware stores all over.
They work as containers and utensils. Pro Tip: You may also be interested in the How to Mortise a door Hinge with a Dremel.
Just to make sure we are on the same page a rotary tool is a handheld power tool (battery or A/C) with a rotary tip that accepts a variety of attachments for a wide variety of tasks. Even if it is outdoor, you still want to make your wood project visible and precise. This kit will come with two additional attachments and 30 accessories.
HAS ANYONE EVER DONE THIS BEFORE? but still allows the natural markings to show through.
The particulate matter is too fine to be filtered by a bandana and will end up in your mouth, nose, and lungs. Some are crusty and dusty, and some look pretty smooth. to gourd crafting.
For a quick look at how a rotary tool will be useful, have a look at this video by Welburn Farms. The tool has plenty of power for a variety of gourd and wood craft work. Along with a quality woodburner, you'll have two of the most used tools a gourder needs. oven rack propped up with some brick supports. Rotate the gourd away from the cut. 6 years ago. You will receive my craft ebook as a thank you! 13 years ago it. throw away the insides. Do not look at the weight of the gourd. Fill it with hot water, and add a squirt of The creative crafting possibilities of hardshell gourds are endless; from bowls and cups (mate gourds, used for drinking yerba mate), to purses, jewelry, Christmas ornaments, lampshades, jewelry boxes, bird houses, tribal penis shields, and even a wide variety of musical instruments.
Clean the gourd, mark where you want to cut, and you are good to go. The saw is easy to control and cuts easier. It will perform quite nicely for metal craft work as well. Make So you have to clean it out, and often this is easy, but occasionally this can get ugly.You should prepare yourself for cleaning the outside with:~ A sink or tub, the size depending on the size(s) of gourds you're cleaning.~ Rags~ Copper scrubbing pads. regular pumpkins so I wanted to see how it would work on the often use a wire hanger that they have As with other Dremel products, as you find other attachments/accessories, they are all interchangeable. knife to scrape it off worked great. Run a small bead of glue into the groove. Cut the top off and outline by drawing lines to be carved.
You'll still end up with a great flex shaft, and plenty of bits and other attachments to complete a wide range of projects.
9.
If mold and the first layer of skin isn't coming off, They work as drinking vessels. You'll see the typical insides of a
In this case you may want to resort to soaking. Gourds: Cleaning the gourd takes some time first hole and then you can make it cut by applying pressure to the Take your Ultimately for a few bucks more, we recommend going with the "Corded Deluxe w/Steady Grip". To give it a glossy finished look, I applied a It was a very long time ago that I acquired "gourd flu", but I don't remember nausea/vomiting/diarrhea Only aches/fever/chills/malaise. overnight. These include a sanding drum and high-speed steel burs.
LOL. Your method works pretty well for cleaning gourds. Gourds bob like little buoys so you have to either find a way to hold them under water, or you have to periodically turn them to make sure all sides get wet and soak thoroughly. It lets you know about any new additions to the site.
Use paper, newsprint, or any flat bag. But I'm not here right now to tell you what to do with them (maybe later); I'm here to tell you how to clean them inside and out, using safety precautions.The need to clean depends largely on what you plan to do with the gourd. A rotary tool can be one of your most useful tools in your gourd tool box. Share it with us! polyurethane coat. Many people use a mini jig-saw to cut and carve their gourd. was this similar to when you got sick from gourd dust/mold?
Cleaning the
Reply Don't be tempted to skip this step, and don't try to improvise by using a bandana instead. The lighter tan you see is the hard shell itself exposed when the waxy skin is removed.Now see the photos of the opened gourds. About: Hoarder of craft supplies, maker of everything I can figure out how to make. Finish with a sealer or finish before you glue in stones.
Thank you for your consideration! Reply I probably should have seen a doctor. Texture and weight also matter. they become tan or brown.
Buffing bits are attached to a rotary tool to polish surfaces. Just by chance I met this group while surfing on the InternetI have lived in US and returned to Turkey a few years ago. 12 years ago You want to do this outside because the Notify me via e-mail if anyone answers my comment. Make sure you have a tight grip on the rotary tool using your palm and fingers. The second type of gourds are the kind
make. Curren, Wet Formed Leather Harmonica Case With 3d Printed Logo.
on Step 3. I'm not sure what kind of results this produces, but the one I have, which was made by my grandfather using this method, is really really nice and I love the neck!
mine hang for one full year, until this Fall when I was ready to craft
off. Variable speed ideal for carving It has a powerful motor for the price and it feels just right in your hand. The list goes on forever, only limited by your imagination. if(typeof ez_ad_units!='undefined'){ez_ad_units.push([[300,250],'thewhittlingguide_com-banner-1','ezslot_3',104,'0','0'])};if(typeof __ez_fad_position!='undefined'){__ez_fad_position('div-gpt-ad-thewhittlingguide_com-banner-1-0')};The soft gourd can get spoiled and rotten from the inside. are green and sometimes have stripes on them.
Submit a Craft Share This Site About Me Contact Me Privacy Policy, Click here to learn more about the book, and to make a donation, A gourd (try a farmer's market or a pumpkin patch), mini electric jig saw, or a Dremel with a thin drill bit hold your gourd.
Set the rotary tools speed at medium when using the sanding drum so that you do not make serious mistakes. This may take up to six months! I used a pair of needle nose pliers to get the rest remove.
Where a good quality dust mask and some eye protection. deck. This is to gourd crafts.
Why its on the list: to have two pumpkins on top of one another. Able to get into tight places. It is amazing to me how Cut one side of the bag and the base so that you have a big rectangle surface. It provides a strong rotary tool with plenty of versatility. I must give a little forewarning that You also want an area with air gourd I use the extra money to help with the cost of craft supplies! Another strong alternative to the Dremel brand that is fantastic for your crafting work. Some have a curled, dried skin inside that is easy to pull out, and others have a white, styrofoam-like lining which isn't so easy to clean out. Prop gourd firmly in your lap and hold your thumb and knuckle of the index finger against the gourd to sturdy your hand.
I've got more birdhouse gourds this year than I've ever had.Never heard of gourd flu and never wore a mask while cleaning them.I had a HUGE one this year that started to rot at the neck while it was drying. To dry However, the right-angle attachment helps get around that drawback. Hence it is called a snake gourd. may have some dark spots on it. The dye will work really well if you want a natural look, but Check the gourd from the outside and test it. What can you expect to find when you open a gourd (via Xacto knives/saws, mini electric jigsaws, or Dremels be careful not to cut yourself)? In addition to dust masks and goggles, you should work in a well-ventilated area.
I tried it with about a dozen, soaking them in an ice chest. They are smooth, plain, patterned, and striped and come in multiple shapes and colors. Then I sprayed it with a Lysol w/bleach product that I had on hand, and gave it a scrub with some steel wool.
You are allowed to leave them on the string on a wire. Allow to dry You may decide to only work on the outside without a need to open the gourd, in which case you get to avoid the extra work involved. called the hard shell gourds (Lagenaria If you want a naturey-looking gourd with its natural waxy coating you don't have to do much beyond washing off dirt and dark mold with a hot water and bleach solution (maybe 10 parts water to 1 part bleach), which retards future mold growth. I am still suffering these same symptoms today 4 days after getting sick. wood.
Choose a gourd that lasts long, and use the correct access and attachments for precise cuts. Do not forget to take the mini circular saw shape for cutting lines. Is it just going to cook or will it dry. Structured tooth carbide burs cut fast and smooth. At this point you may end up with a very clean vessel, and if that's the case you're lucky. mold spores and we don't want to
hand. It still had some spots on it, as you can see. Choose a flat surface that you do not need to use later on. layer. I have the strange urge to make a gourd water bottle/flask. Here's what my gourd looked like when I was done scrubbing. I whittle, carve, wood burn and more! I was able to clean my squash/pumpkin, but it will be all dried out, which makes it easier to The Creative Crafter is my quarterly newsletter that is emailed four times per year. After my return , I have been in search of what to do and finally decided making gourd lamps.First, it was just a hobby but making gourd lamps turned to a pofessionality in time and today I am a gourd lamp producer and exporter.If you would like to have an idea about my works please visit following links. dry 7 years ago I fill my kitchen sinks with hot water and a bit of bleach and shove as many gourds in there as will fit. Using my Dremel with a small drill bit, I took my time and It makes the cut smooth since there is a guideline for you to follow. I'd love to see what you end up making! This is my first gourd craft I had And you should, too, if it ever happens to you.So to prepare, make sure you use a dust mask. The hard shell gourds, when dry, usually sold by the glass block crafts). your guidance is really helpful for me, if you want to know more about the ideas of cutting tools and guidance then you can use tttools website for more information. Get ready for cutting. No cut should be in the gourd. protective equipment to clean out and carve your gourd. This little package packs quite a bit with it. It has an easy to use dial to find the speed you like.
your gourd to soak in this solution for about an hour before you even I then began to read about I bet I just ruined a gorgeous, giant birdhouse gourd.
siceraria). You can add a night light bulb in the back to light it up! I won't lie, this can be a huge pain in the patootie. As you finish off the gourd, it has to match the colors of the design.
(I know this isn't a medical blog, I am just curious if the gourd dust could have been reason). out, which worked great. Haven't ever tried gourd craft, so a real nubie question: How did you cut it open? on Introduction. For the top part Hey, I don't have first hand experience with this, but if you want to have a neck like mine, you can take little rocks and just shake it all around for a while. And scraping. Once all cleaned out, I chose to soak my gourd in a fresh on Introduction. Neither option is guaranteed to lighten the shell, but occasionally it works.If you have a gourd with waxy areas on the shell you'll have to soak longer, scrub harder, and possibly resort to scraping the wax off with the edge of a knife. We use cookies to ensure that we give you the best experience on our website. If you are enjoying this site, would you consider making a small donation? Dust, seeds, a styrofoam-like substance, and hardened pulp, maybe even a few tiny beetles. Follow the line marked on the gourd as you cut. Some of the other bits you may find, but perhaps won't be using on much on gourds include: Includes a flex shaft for detailed work. orange spray paint), Thompson's Water Seal (if you will leave your gourd outside burned. Choose a good one designed for working with wood/sawdust; if possible, look into one that also protects against molds/fungus. I let mine dry for one patch. will last thousands of years! However, we think that at some point each crafter is will definitely benefit by having one of these tools at their disposal. A round needle file works as a substitute as well as a rolled tube of sandpaper. (that's what I used), Leather dye, or paint if you choose (I ended up using an These are the types to clean and kill off any mold that was up inside. Imagine! carve
Bottle gourds are also known as hardshell gourds. I used
They are popular in making bits and wheels but also work on gourds, and it depends on the project you are working on. Now, put on your gloves if you don't want to get scraped up. Thanks for the precautions!
The Whittling Guide is a growing repository of information on how to whittle. a cotton ball and just dabbed it on. Most likely your gourd will be pretty moldy and your article is really helpful for me. too. Lightly press the gourd to see if it is soft from anywhere. You may have a little piece of "stem" (umbilical cord? jack-o-lantern duo as my first gourd craft! dishwashing detergent and a half a cup or so of bleach. A lot of gourds, though, have stuff inside that resembles thick, squishy styrofoam, and it's very difficult to scrape out. They are soft-shelled gourds that look like squash. With any $5.00 donation or more, you will receive my 650 page ebook full of 178 craft tutorials from this site.
gourd is actually going to begin to mold and you don't want that stuff Last week I was cleaning and cutting gourd bowls and then a day or two later I got extremely sick nausea, diarrhea, vomiting, aches all over my body, and a fever. This will give you a bit more comfortable hold on the tool as well as even more attachments and bits. The gourd shapes include apple, pear, egg, and orange. This dye is very easy to use, and it stains the The dust contains after I dyed it I ended up using an orange spray paint instead. Not all hardshell gourds are terrible inside, but they are all dusty, and you can't guess which ones will merely make you sneeze and which ones might contain mold/fungus, bacteria, and other pathogens that could cause serious allergic reactions, including anaphylactic shock. on Introduction. Second, use protective goggles. Hardshell gourds have been used as food and beverage containers, and art pieces for centuries. You'll notice some are fairly empty, and some are full nearly to the top with dried vegetable matter and seeds. make gourd crafts from. Slide them off the wire as you apply the glue. I do not have photos of this process, but will ad some later, after my next gourd shopping expedition.What I do have is a photo of a gourd that didn't need much soaking and did well with just some hot water and a copper scrubbie. Look for a test gourd to use before you make permanent marks on the gourd. As you can see there are plenty of options to choose from, varying in price, attachments, accessories as well as corded vs cordless. I was worried about animals, so I chose to hang my gourd.
Starting from gourd lamp beads to table lamp bases, you can find some materials used for making gourd lamps.marmarisgeceleri.blogspot.comantalyakabakevi.blogspot.compinterest.com/makbulerdoganinstagram.com/gourd_lampThank you, Reply of the gourd, the neck made it pretty tight to get up there with my I typically make a starter cut with an Xacto blade, then finish with a mini jigsaw (try eBay). Choose a stain or paint for your gourd. Did I mention some gourds have extremely bitter dust?
this is a time consuming project, because you must allow time for the The flowers are moth-pollinated. To inlay a cabochon, trace the stone shape where you want to set it.
I have grown birdhouse and luffa gourds for years. I don't do scrapbooking. Now grab your taxidermy scraper and your melon baller, which should be sufficient in scraping out all of the stuck-on matter from a typical gourd, and start scraping. thank you so much for your time and effort on this, it has made the world of difference and i am now excited about my future projects. all 6 of them, Reply 1. They can they be carved, painted, or wood I hope that you're well again. 10 years ago In fact, it can sometimes be a bit --too-- powerful: with a grinder bit loaded, you can chew through more material than you may have anticipated at max RPM if you're not careful. I'd love to see your finished projects if you'd link to them in the comments :). Thompson water sealer works great. Did you make this project? change your soapy water and let it soak again. Remove the outer shell, and the scratchy inner fiber makes a great scrubby. 12 years ago I've personally been flattened with a gourd dust-related illness that gourd crafters refer to as "gourd flu", which was basically illness that mimicked semi-severe flu symptoms (fever, aching joints, muscle soreness, mucus, fatigue) for about two to three days. You can also try bending long-handled spoons to reach odd areas, but it's not very effective in most cases. The tool has had a lot of attachment for your drilling polishing and grafting works. 3. Use a sanding sponge, which easily adapts to the curves, to rub the walls smooth. for a night light